Opening TimesMon-Fri 07:00-17:00 Sat 08:00-12:00
Quick OrderFor your regular items
Click & CollectTimed collection slots
Delivery InformationLocal and National Deliveries
Covid-19Please wear a face mask
Local DeliveryDelivery by our own vehicles around Surrey and Sussex. Please see Delivery Information for details.
Nationwide DeliveryDelivery by national courier service. Please see Delivery Information for details.
Collection from StoreCollection from our depot near Horsham RH12 3SD. Please see Delivery Information for details.
Estimated lead time 3 to 5 days
Easy-Trim PolyureCoat is a liquid waterproof membrane that's formulated from a unique blend of moisture triggered polyurethane resin. This helps to produce a fast curing, seamless and elastic waterproofing system that's both highly durable and puncture resistant.
PolyureCoat is ideal for both new construction and refurbishment projects and is suitable for installations on:
Mix the product for approximately 2 minutes before carefully pouring the accelerator into the tin of PolyureCoat and slowly
mixing with a paddle mixer until the accelerator is visibly mixed with the PolyureCoat. Mix the accelerator at the exact same
ratio as supplied with the PolyureCoat. Not adhering to the prescribed ratio could lead to an incorrect mix and the product not
Work out the area to be covered by each tin before commencing the application. Apply the accelerated product using a roller,
in a single coat application, at a nominal rate of 1.5kg/m² over the entire main area. Upstands, joints and de-bonded laps must
be reinforced using Easy-Trim GFR 225 in a wet - wet application. Apply a coat of PolyureCoat at 1.5kg/m² over the upstand
or joint, (ply or OSB deck joints must be taped over) then bed into the prepared area Easy-Trim GFR 225 (available in 150mm
and 250mm widths). Pull through the PolyureCoat using a roller or brush across the matting, adding a further 0.25kg/m² whilst
still wet to fully encapsulate the GFR matting. Ensure the detail is continued on all the upstands.
The curing time of accelerated PolyureCoat is rapid, so ensure the required application standard is achieved before moving on.
For a full product guarantee the whole roof area must be coated in PolyureCoat. When applied without the accelerator,
PolyureCoat must be applied in two thin coats with a coverage rate of no more than 0.8kg/m² per coat.
A completely waterproof skin will be formed after 30 minutes, in normal conditions, of installing the membrane and fully trafficable
after 2-4 hours. Full curing time is 24 hours. PolyureCoat will not be damaged by a light shower 30 minutes after the installation,
but a heavy shower could cause indentations in the membrane.
Customers with a D W Nye trade credit account get free local delivery
All delivery charges are inclusive of VAT.
Local Delivery - Bulky Items
Over £120 = Free Delivery
Under £120 = £12 Next Day Delivery
Next Day Delivery Calculator:
Local Delivery - Small Items
Over £60 = £6 next day delivery or Free for a 2-4 Day Delivery from dispatch
Under £60 = £12 next day delivery or £6 for a 2-4 Day Delivery from dispatch
National Delivery - Bulky Items
Over £600 (inc VAT) = Free 2-4 Day Delivery from dispatch
Under £600 (inc VAT) = £40 2-4 day Delivery from dispatch
The full day an item is dispatched is counted as the dispatch day not delivery day. Once the item is dispatched you will receive a notification on the actual delivery day
National Delivery - Small Items
Over £60 (inc VAT) = £6 next day delivery or Free for a 2-4 Day Delivery from dispatch
Under £60 (inc VAT) = £12 next day delivery or £6 for a 2-4 Day Delivery from dispatch
Our main depot is in Kingsfold, near Horsham on the Surrey and Sussex border. The postcode is RH12 3SD. We operate a local delivery service from this single depot. Our catchment range for local deliveries is an average of 25 miles.
If a product has a ‘Local Delivery’ tick we are able to deliver this with our own lorries most of the time. Sometimes we will use external hauliers.
Deliveries will be made to kerbside only to the nearest safest point to the delivery address and off loaded onto firm ground. If the driver is requested to leave the highway and enter the property or site, any damage which may be caused to yours or the local authority's property (such as footpaths and manhole covers), will be your or your agents' responsibility, together with the cost of any repairs or replacement items. Entering properties or crane off loading over walls, hedges and fences will be made at our drivers discretion unless previously arranged with the transport office.
We will endeavour to deliver on the day specified, but cannot be held responsible should delays occur due to circumstances beyond our control. Please try and avoid arranging for tradesmen to begin work before the materials have arrived as D W Nye Ltd will not be held liable for any costs incurred as a result of not meeting a delivery date.
Many of our products can be sent anywhere in the country, either by post or by a haulier. This means the product will either come from ourselves or it will come from a 3rd party stockist. With most haulier deliveries this will be either in a van or in a box lorry with a pump truck. They will not be able to deliver with a crane offload lorry. If you have any special delivery requirements please let us know.
Collection from Store:
These items are expected to be in stock most of the time (sometimes lead times do get extended and we are unable to have a 100% stock holding 100% of the time). You will need your order number and the card you used to pay online.
We have a range of machinery on site to load your materials onto your vehicle whether it be loose or bulk bagged aggregates, part or full pallets of bricks or blocks and if you are in a hurry please ring in advance and we can prepare your order to save you time when collecting.
Some items in construction and landscaping are not always easy to handle and need either assistance or a crane to load/unload the materials. We have tried to make sure this is clear when ordering.
British Lead Mills Code 4 Lead 240mm x 3 Metre
OX Tools Pro Mixing Paddle - 100 X 600mm
Polyurecoat Accelerator for weatherproofing membrane - 210ml
Easy-Trim Polyure Coat - 25Kg - Weatherproofing Membrane - Dark Grey
Polyurecoat Accelerator for weatherproofing membrane - 2 Litre
Easy Trim GFR Matting - Weatherproofing Membrane - 150mm X 20m
Easy Trim Polyurecoat Reinforcing Fleece 1000mm x 50m Roll
Easy Trim PolyureCoat Liquid Waterproofing System Gutter Drip Trim 2.5m Long
NYEs tips on how to make over a room while staying safe.
We offer advice on the most important maintenance jobs around the home and in your garden this autumn.
A 6 step guide to laying Templeton Driveway Setts
We offer some advice on how to revive the wood in your garden including some top tips for timber.