Easy-Trim Polyure Coat - 25Kg - Weatherproofing Membrane - Dark Grey

Part code: ETPOLYU25KG

£166.96 / eachinc VAT
QTY

Local DeliveryDelivery by our own vehicles around Surrey and Sussex. Please see Delivery Information for details.

Nationwide DeliveryDelivery by national courier service. Please see Delivery Information for details.

Collection from StoreCollection from our depot near Horsham RH12 3SD. Please see Delivery Information for details.

Bulky Item

In Stock

Easy-Trim PolyureCoat is a liquid waterproof membrane that's formulated from a unique blend of moisture triggered polyurethane resin. This helps to produce a fast curing, seamless and elastic waterproofing system that's both highly durable and puncture resistant.

PolyureCoat is ideal for both new construction and refurbishment projects and is suitable for installations on:

  • GRP roofs
  • Profiled metal roofs
  • Existing single ply membrane (PVC)
  • Existing bituminous felt
  • Existing mastic asphalt
  • Concrete deck
  • New ply/OSB decks
  • Large commercial roofs
  • Metal and plywood gutters

Details

  • Low temperature installation of -5°C if accelerant is used
  • 12 months shelf life, 6 months longer than other similar products on the market
  • Easy-Trim GFR 225 reinforcement only needed along the upstands and other details
  • Apply with a roller, brush or spray

Mixing

Mix the product for approximately 2 minutes before carefully pouring the accelerator into the tin of PolyureCoat and slowly
mixing with a paddle mixer until the accelerator is visibly mixed with the PolyureCoat. Mix the accelerator at the exact same
ratio as supplied with the PolyureCoat. Not adhering to the prescribed ratio could lead to an incorrect mix and the product not
curing properly.

Application

Work out the area to be covered by each tin before commencing the application. Apply the accelerated product using a roller,
in a single coat application, at a nominal rate of 1.5kg/m² over the entire main area. Upstands, joints and de-bonded laps must
be reinforced using Easy-Trim GFR 225 in a wet - wet application. Apply a coat of PolyureCoat at 1.5kg/m² over the upstand
or joint, (ply or OSB deck joints must be taped over) then bed into the prepared area Easy-Trim GFR 225 (available in 150mm
and 250mm widths). Pull through the PolyureCoat using a roller or brush across the matting, adding a further 0.25kg/m² whilst
still wet to fully encapsulate the GFR matting. Ensure the detail is continued on all the upstands.

The curing time of accelerated PolyureCoat is rapid, so ensure the required application standard is achieved before moving on.
For a full product guarantee the whole roof area must be coated in PolyureCoat. When applied without the accelerator,
PolyureCoat must be applied in two thin coats with a coverage rate of no more than 0.8kg/m² per coat.
A completely waterproof skin will be formed after 30 minutes, in normal conditions, of installing the membrane and fully trafficable
after 2-4 hours. Full curing time is 24 hours. PolyureCoat will not be damaged by a light shower 30 minutes after the installation,
but a heavy shower could cause indentations in the membrane.

£166.96 / eachinc VAT
QTY

Local DeliveryDelivery by our own vehicles around Surrey and Sussex. Please see Delivery Information for details.

Nationwide DeliveryDelivery by national courier service. Please see Delivery Information for details.

Collection from StoreCollection from our depot near Horsham RH12 3SD. Please see Delivery Information for details.

Bulky Item

In Stock

Product Code:ETPOLYU25KG
Weight25 kg
ColourDark Grey

Easy-Trim Polyure Coat - 25Kg - Weatherproofing Membrane - Dark Grey Reviews

There are no reviews yet for this product.
Easy-Trim Polyure Coat - 25Kg - Weatherproofing Membrane - Dark Grey
£166.96 / eachinc VAT
QTY

Sign Up Today!

Register a trade account for exclusive deals and incentives.

Sign Up